Zambelis E135 LED outdoor up-and-down wall light, graphite, 2×3 W, 3000 K, IP54 Promo Code - ZAM10 until the end of Oct 30

Zambelis E135 is a graphite outdoor wall light with a body that tapers towards the top, forming a distinct trapezoid against the wall. Its aluminium housing and tempered glass enclose two integrated LED light sources that illuminate upwards and downwards at the same time. The textured finish and sloping sides distinguish it from cylindrical facade fittings.

Light above and below the fitting

The two sources are rated at 3 W each, giving a total of 6 W, with a declared luminaire output of 480 lm. The 3000 K colour temperature is warm white. When adding the fitting to an existing exterior lighting scheme, compare this with the other lamps so that adjacent areas do not unintentionally have different light colours.

The up-and-down arrangement highlights a vertical section of wall rather than providing floodlighting across an entire garden. E135 is not dimmable. Its LED sources are already built in, so there is no separate bulb or lamp cap to choose. The installation instructions restrict light-source replacement to the manufacturer, its service agent or a similarly qualified person; this is not a fitting for routine user replacement of a screw-in bulb.

Allowing space on the wall

The body measures 17.5 cm high, 11 cm wide and 6.5 cm deep. Check both the outline of the tapered housing and the wall space above and below it, where the light will fall. Installation is surface mounted, without a recess for the complete body.

The IP54 rating supports outdoor use on facades, balconies and terrace walls, including exterior hotel walls. This is a wall fitting, not a garden bollard or a ground-recessed light. Its graphite finish, plain surfaces and geometric silhouette suit modern, modernist and minimalist architectural schemes.

Fixed electrical installation

The supply is 220–240 V. As a Class I fitting, E135 requires a protective earth connection. Installation and connection should be undertaken by an electrician with the supply isolated. The instructions show a separate base fixed to the wall and the body fitted onto its mounting bracket. The manufacturer specifies a three-year warranty for this model.