Asker 1311CS is an 85 cm NORLYS bollard light: a rectangular body turns at a right angle at the top into a flat head that shines downwards. The cast aluminium is powder-coated in a corten colour close to RAL 8011 – a paint colour, not weathering steel. The light passes through a clear, textured diffuser of UV-stabilised polycarbonate, and the LED module and driver are built in, so there is no lamp to buy.
Dimensions, foundation and wiring
The body is 11 cm thick and the head projects 20 cm. The bollard weighs 4.01 kg and is fixed through four ø8 mm holes spaced 18 x 50 mm. Ground and concrete fixing elements, a foundation adapter and mounting adapters are sold separately, chosen to suit the ground.
The terminals take conductors up to 3 x 2.4 mm², and further bollards can be looped through with cable up to 3 x 4 mm². The gland seals round cable with a diameter of 4–8, 8–12 or 10–13.6 mm. The luminaire runs on 230 V, is protection class I and must be connected to the protective earth; installation and service work are for a suitably qualified person.
What light it gives
The LED module draws 5.6 W and produces 1030 lm, while 573 lm leave the complete luminaire at 7.2 W, i.e. 79.6 lm/W. 3000 K is warm white, and Ra 80 shows paving and plants without noticeable colour distortion. Only 0.63 % of the flux goes upwards and the BUG rating is B0-U1-G0, so the bollard lights the ground rather than the neighbours' windows or the sky. The light sources have energy class C.
The built-in Philips Xitanium TE driver allows dimming with a trailing-edge (TE) phase dimmer.
Durability, service and intended use
IP65 means a dust-tight housing protected against water jets, and IK10 is the highest impact-resistance grade on the IK scale. Norlys rates the LED module at more than 102,000 h at L80, about 93 years at three hours a day, and the driver at 50,000 h. The LED module and driver are replaced only by a professional service.
Norlys intends Asker for lighting gardens and private grounds – a driveway, a path or the edge of a terrace. The plain, geometric form without ornament suits modern and minimalist architecture. The same body is also available as a 24 V DC version, DC1311CS.