Asker DC1313GR is an 85 cm bollard light shaped like an inverted L: a flat head projects from a narrow rectangular column, and two LED modules tucked under it shine downwards. The body is cast aluminium, powder-coated in graphite grey (RAL 7016). The DC prefix in the code marks the version supplied with 24 V DC.
24 V DC supply — what you need to buy
The bollard is not connected directly to 230 V mains. It needs an external voltage-stabilised 24 V DC power supply, which is not included; the manufacturer leaves the choice of supply and the installation to a suitably qualified person. The light is protection class III, so it runs on safety extra-low voltage and needs no protective earth. The LED modules are suitable for dimming, and the control method follows from the installation design. For a 230 V circuit there is the 1313 version without the DC prefix.
How much light and what kind
The two LED modules produce 1024 lm together, and 543 lm leaves the luminaire at 8.7 W. Only 0.5% of the flux goes upwards (BUG rating B0-U1-G0), so the bollard does not brighten the sky. 2700 K is a warm, slightly yellowish white close to a traditional bulb, and CRI 80 gives the colour rendering typical outdoors. The modules sit behind clear, textured, UV-stabilised polycarbonate. The manufacturer states an L80 lifetime of over 102,000 h.
Installation and durability
The bollard measures 85 x 20 x 11 cm and weighs 4.01 kg; the head throws the light beyond the column, so it is turned with the head over the path or driveway. The base is bolted down through four ø8 mm holes spaced 18 x 50 mm. A ground anchor, a concreting anchor, a concrete foundation adapter and mounting adapters are sold separately by Norlys and chosen to suit the ground. The terminals take conductors up to 2 x 4 mm², also when looped through, and the cable may be 5–12 mm in diameter, so several bollards can run from one line.
IP65 means dust-tight and protected against water jets, and IK10 is the highest impact rating on the IK scale. The LED modules may be replaced only by a professional service. The manufacturer designed Asker for private grounds and architectural projects; the plain, angular body without ornament suits modern, minimalist architecture.