London Big 4128BC is a complete garden lantern with a classic design: a telescopic pole, a terminal with two arms and two lantern heads with built-in LED modules. The whole assembly is powder-coated cast aluminium finished in copper patina.
Height, span and installation
The telescopic pole lets you set the lantern height from 191 to 279 cm, and the arms with their heads span 91 cm. The height is chosen on site — lower beside a path in a home garden, higher along a wider driveway. The manufacturer describes the pole as a light construction intended for gardens and private grounds. The set includes the luminaire (no. 4120), the terminal (no. 3040) and the pole (no. 3010); other accessories are ordered separately.
The base is bolted down through three ø10.5 mm holes spaced 120° apart on a ø240 mm circle. The set weighs 10.05 kg net and 12.55 kg packed. The terminals take conductors up to 4 × 2.5 mm² and let the supply run on to the next lantern in a loop; the supply cable should have an outer diameter of 7 to 12.5 mm.
The light it gives
Each of the two lantern heads holds a Philips Fortimo DLM ES 1100 LED module rated at 9.5 W, 19 W in total. The modules produce 2200 lm and the luminaire delivers 1514 lm at 79.7 lm/W — enough to light a path and the area around the pole. 3000 K is a warm white with a slightly yellowish tone, and CRI 80 keeps plants and facades close to their natural colours. The light source has energy efficiency class E.
The lantern heads give unshielded light, without directional lenses. A ULOR of 0% means the luminaire sends no light into the sky, and the BUG rating B1-U1-G0 indicates little light thrown backwards and upwards and the lowest glare class — which matters where the lantern stands close to windows.
Durability and servicing
IP54 protection keeps out dust and water splashed from any direction, and IK07 impact resistance corresponds to an energy of 2 J. The lantern operates at ambient temperatures from −20 to +45 °C. Protection class II means double insulation, with no earth conductor. After more than 50,000 h the LED modules still deliver at least 70% of their initial flux (L70, TM-21 per LM-80). Only a professional service may replace the integrated light source.