FLOR P/S is an LED ceiling light shaped as a flat ring 100 cm in diameter, with an aluminium housing in a white satin finish. An opal methacrylate diffuser closes the ring from below, and the centre stays open, so the ceiling shows through it.
Size and installation
The ring is 100 cm in diameter, 8 cm high and 7 cm wide. Compare the diameter with the size of the room or the table it will sit above. The fitting mounts directly to the ceiling and weighs 5.5 kg, so it needs a secure fixing in the ceiling structure, and the manufacturer reserves installation for qualified personnel. It is a protection class I luminaire, connected with a protective earth conductor to a 220–240 V supply.
What light it gives
The integrated LED source draws 80 W and delivers 6300 lm — main-lighting level, roughly as much as eight old 60 W bulbs. 3000 K is a warm white, CRI above 80 gives correct colour rendering, and the light leaves downwards at 120°, spread by the opal diffuser. The manufacturer states a life of 30,000 hours; the diodes are built in, so there are no bulbs to buy.
The ceiling light is dimmable, but it needs an external phase-cut dimmer with a push button. The dimmer is not included — it has to be bought separately and fitted into the wiring.
Finishes and which interior it suits
A smooth ring without ornament is a modern form, and a 100 cm diameter with 6300 lm suits the role of the main light in a living room. The same ring also comes in black (FFLPN4, 6100 lm) and brushed gold (FFLPO4, 6200 lm) — at identical power the white version gives the most light. The FLOR series also includes other ring sizes.