Gea Luce GES2211 is an anthracite outdoor wall light with a shallow rectangular body and light directed both upwards and downwards. Its die-cast aluminium housing has clear glass covers, with LED modules already integrated. A solid front and straight edges give the fitting a modern, minimalist appearance rather than the look of a lantern.
Choose the light colour during installation
An internal selector offers 3000, 4000 or 5000 K before final assembly. These settings provide progressively warmer, more neutral or cooler-looking light. The selector is inside the housing, so this is not remote colour control or a colour change operated through an ordinary wall switch. Decide on the setting while the fitting is being installed, particularly when matching several lights on one wall.
Two 5 W light sources produce the upward and downward output. The manufacturer lists 650, 730 and 680 lm for the three colour settings, with a beam angle of 133°. Operation is on/off only: this fitting is not dimmable. Selecting a colour temperature therefore does not provide brightness control, and the light should not be planned as part of a dimmer-controlled arrangement.
Check the wall space and light direction
The housing measures 17.5 cm wide, 9 cm high and 3 cm deep. Compare those measurements with the available wall area and cable outlet before installation. Light exits along the top and bottom edges, rather than through the opaque front. Allow for that direction when positioning the fitting on a facade, terrace wall or balcony wall.
The manufacturer specifies outdoor wall mounting and IP65 protection. This is not a freestanding path light. Its dark rectangular form can follow the straight divisions of a contemporary facade without introducing an ornamental shade.
Connection and care
The supply is 220–240 V AC. Class I construction requires a protective earth connection, and installation must be carried out by qualified personnel. Disconnect the mains before working on the fitting. The instructions recommend a damp cloth with mild detergent, followed by gentle drying. Keep water and detergent away from cables and electrical components.