LED Labs STD 16-1066-42 is a five-metre LED strip with 600 SMD 2835 LEDs and fixed neutral white light at 4000 K. This IP65HS version uses a heat-shrink sleeve rather than a conventional silicone coating. When comparing strips in the STD range, check the protective construction as well as the light colour and supply voltage.
Plan the length and mounting space
The PCB is 8 mm wide, with cutting points at 25 mm intervals. Compare these dimensions with the available mounting space and the section length you need before choosing a profile. There are 120 LEDs per metre. The separate visible LED points should not be confused with the continuous emitting surface of a COB strip. The manufacturer specifies a double-sided adhesive backing for attachment to the supporting surface.
Fixed white light and a matching power supply
The 4000 K colour temperature does not change: this is neither an RGB strip nor a tunable-white version. The specified luminous flux is 1040 lm per metre, with CRI 80 colour rendering. These figures describe the strip itself, not the illumination reaching a worktop, which also depends on placement and any cover used.
Operation requires a 12 V DC LED power supply. Power consumption is 9.6 W per metre, so supply sizing needs to account for the length connected. Do not connect the strip directly to a 230 V mains supply. Dimming is possible only with a suitable compatible dimmer.
Under cabinets and around splashes
The manufacturer identifies under-cabinet kitchen lighting as one application. The narrow format allows a line of light to be planned into cabinetry instead of using separate spot fittings. IP65 provides protection against dust and water jets, not immersion. Connections and the power supply also need appropriate protection; the sleeve on the strip does not determine the protection of the complete installation.