LED Labs PRO A MINI is a single-sided connector for attaching a wire to an 8 mm single-colour SMD LED strip. Its transparent polycarbonate housing encloses copper contacts, while the latch makes a solderless connection possible.
Matching the strip and electrical load
Variant 24-1100-83 uses a 2PIN layout and is intended for SMD strips. Check the strip technology and contact-pad layout as well as its 8 mm width before choosing the connector. The manufacturer lists separate A MINI connectors for COB strips, so matching width alone does not make the variants interchangeable.
The connector supports 5/12/24 V DC and a maximum current of 2 A. This is a current limit, not a wattage rating: compare it with the current drawn by the strip section that will be supplied through the connection.
Wire, profile clearance and sealing
This version is supplied without a cable, so a separate wire is needed to make the connection. The pins pierce the strip's PCB, removing the need to solder the joint itself. The connector measures 18 × 10 × 5 mm; compare those dimensions with the space available inside your chosen profile.
The manufacturer allows use with IP20 and IP65 strips. With an IP65 strip, however, the connection must be sealed to retain that protection rating. Closing the latch does not replace the required sealing.