The Lillehammer 2290GB is an outdoor wall light shaped as a slim rectangular block of cast aluminium, painted gray-beige. A pane of optical glass sits on the top edge, and the light leaves in two directions: at 4° upward and 60° downward, or the other way round.
Size and mounting
The fixture is 18.5 cm high, 8 cm wide, projects 11 cm from the wall and weighs 1.7 kg. It is a compact body you can compare with the width of a facade pier or the distance to a door. It is fixed to the wall with two screws in ø5 mm holes spaced 45 × 130 mm apart.
The connection terminals take cable up to 3 × 2.5 mm², or 3 × 1.5 mm² when fixtures are looped through. Round-sheathed cable must be 7–10.5 mm in diameter, because that is what the EPDM gland grips.
Light
The source is an integrated 8 W LED module, included, so you do not buy a bulb. It emits 2700 K, a warm, slightly yellowish light, and a colour rendering index of Ra 80 shows the facade without obvious distortion. A luminous flux of 119 lm is an accent value, below the roughly 400 lm of mood lighting: the fixture brings out the texture of the wall above and below it but will not light a whole terrace.
The light can be dimmed with a trailing-edge phase dimmer. The LED colour deviation is within SDCM3, so several fixtures side by side look the same.
Protection and where it goes
IP65 allows outdoor mounting without extra cover, and impact rating IK08 places it among impact-resistant fixtures. The manufacturer gives an ambient temperature range of -20 to +45 °C. The catalogue lists it for a facade and an outdoor garden space; we class the style as modern — a plain body without ornament. The Lillehammer series offers the same shape in other colours.