Lillehammer 2291CB Copper Brown LED Up-Down Outdoor Wall Light 2700 K by NORLYS

Lillehammer 2291CB is an outdoor wall light shaped as an upright rectangular block, cast in aluminium and powder-coated in copper brown. Its top and bottom faces carry windows of optical safety glass, through which two narrow 60° cones of light leave — one upward, one downward. On the wall this draws two symmetrical beams above and below the fitting.

Size and wiring

The body is 18.5 cm tall with an 11 × 8 cm cross-section. It is fixed through two ø5 mm holes spaced 45 × 130 mm and weighs 1.66 kg. It is protection class I, so the supply cable needs an earth conductor.

The terminals take up to 3 × 2.5 mm², and the supply can be looped on to the next fitting with up to 3 × 1.5 mm² — several lights spaced along a facade can run from a single line. The round-sheathed cable should be 7 to 10.5 mm in diameter.

Light and dimming

Two Cree LED modules draw 7.27 W together with the driver. The modules themselves produce 1008 lm, but 216 lm leave the fitting because the narrow optics concentrate the light into two cones — this is a light for accenting a wall, not for lighting a driveway or garden. Half of the output goes upward (ULOR 50%). 2700 K is warm, slightly yellowish light.

It can be dimmed with a trailing-edge phase dimmer. The modules and driver are replaced by a professional service — the manufacturer offers kit ZS2291zx0009 for this. The driver is rated for 50,000 h.

Durability

IP65 means a dust-tight housing protected against water jets, and IK08 means resistance to 5 J impacts. The manufacturer designed Lillehammer for lighting walls and facades.