Lumines TEKKNI+ S14+ frosted LED profile cover 2.02 m Special Offer

The Lumines TEKKNI+ S14+ cover is a flat, click-in frosted PVC diffuser for this series of aluminium LED profiles. This length is 2.02 m, article 11-1562-20, EAN 5904405985502. The photograph shows a long, slightly translucent extrusion with side hooks: a channel cover, not a fabric lampshade.

Seated in the matching profile, it closes the open LED channel, hides the strip and spreads its light. The frosted version transmits 56% of the light according to the Lumines photometry laboratory (tolerance ±5%). That is more than the milky S14+ cover and less than the transparent one, so the diode line is softened without being as dim as behind milky plastic.

Which profiles it fits

The S14+ section is specified for TEKKNI+ systems ORRE+, SELDE+, BARDE+, HELSE+ and SKAGEN+. It is not a universal Lumines cover: do not assume it will click into System D, SLIM or another family. Check the profile marking before you cut — cover and extrusion must share the S14+ shape.

The 2.02 m length is the 2 m class with extra for trimming at joints. You shorten the cover to the profile; it is a rigid bar, not a roll of tape.

What you receive and what is missing

This offer is the cover only. The aluminium profile, LED strip, driver, end caps and mounting clips are separate TEKKNI+ parts. Without the profile you cannot fix this cover to a wall or ceiling — it closes a channel, it is not a complete luminaire.

The material is PVC with a frosted, slightly milky-white translucency. The official card lists neither gasket nor IP rating, so this SKU does not seal a shower or an outdoor run. Inside a closed indoor channel it keeps dust and accidental contact off the strip along the covered length.

How the cover changes the light

The frosted surface breaks up individual LED points. At 56% transmittance you keep more flux than with the 40% milky cover, and the line is more even than behind 87% clear PVC. Colour and brightness still come from the strip you install; the cover includes no light source and does not shift CCT by itself.

Whether the finished line sits in a ceiling cove, a cabinet or on a wall depends on the TEKKNI+ profile you pair it with. The cover alone does not make the set bathroom- or garden-rated.