Lutec TELIS solar outdoor wall light 11 W 3000 K dark grey with motion sensor 6929701335

Lutec TELIS 6929701335 is a solar outdoor wall light with a rectangular opal diffuser framed in dark grey. Its solar panel occupies the top of the housing, so choosing a position involves more than deciding where the light should fall: sunlight must also reach the charging surface.

Choose the position around solar access

A 1.5 W monocrystalline panel charges one 3.7 V, 1800 mAh lithium-ion battery. This is not a wall light intended for connection to a 230 V mains supply. The manufacturer recommends eight hours of sunlight for charging. Actual operating time depends on weather and location, so a deep overhang or permanently shaded wall can restrict charging.

The housing measures 18 cm wide, 5.7 cm high and 9.6 cm deep. Compare that projection with the space available beside the wall, particularly along a passage. Its IP54 rating provides splash protection for outdoor installation. A balcony or terrace position still needs sufficient sunlight on the upper panel.

Motion detection and operating choices

The manual provides AUTO, DIM and ON modes, plus OFF. In sensor operation, detection becomes active at dusk and movement switches the light on for 30 seconds. The detection angle is 120° and the stated reach is up to 8 m; the installation diagram shows a height of 2.5 m. These figures describe the sensor, not the beam angle of the light.

Warm white light in a horizontal frame

The integrated LED module is rated at 11 W with a 3000 K light colour. Lutec states a luminaire output of 1100 lm. An opal polycarbonate diffuser covers the light source, while the housing is synthetic. The plain horizontal shape suits modern and minimalist façades, terrace walls or fences where solar access permits. The LED module is non-replaceable: when it reaches the end of its life, the complete luminaire is replaced rather than a bulb.