The Moss 6352AL is a recessed wall light with a round 12 cm front in light grey and a clear safety-glass cover. The body is powder-coated cast aluminium, and the integrated LED module throws a symmetrical 36° beam that can be tilted by ±20° after installation.
How it is installed
The fitting sits in a round opening of about 111 mm diameter and 85 mm depth; according to the maker's installation manual, its screw clamps grip a wall or board 0.5 to 40 mm thick, and at least 90 mm of free space is needed behind it. Check both figures before cutting the hole.
A 0.3 m H05RN-F 3G1 lead comes out of the fitting and is connected to the mains in a junction box. The sealed Norlys connection box (index 145) is sold separately. The fitting is protection class I, so it is connected with an earth conductor.
How much light, and what kind
The module draws 4.2 W and the fitting delivers 406 lm at 4000 K, a neutral white — for comparison, an old 60 W bulb gave about 800 lm. This is accent light: according to the maker's photometric data, the beam makes a pool about 1.46 m across from 2 m away and about 2.2 m across from 3 m. The same fitting in warm 3000 K is index 6346.
It can be dimmed with a phase dimmer; the maker allows both trailing-edge (TE) and leading-edge (LE) control. The light source is integrated and included.
Where it fits
Norlys intends the Moss range for lighting small structures, single trees and garden details, and in our catalogue the fitting is assigned to facades and fences. IP65 means a dust-tight body protected against water jets, so the front can work in an exposed wall, and IK06 means moderate impact resistance. Once installed, only a flat ring shows on the wall and the light does the work.
Add your comment about Moss 6352AL Light Grey LED Recessed Wall Light by NORLYS