NORLYS Nora 2484CS is a square outdoor wall light with a rusty-brown finish that the manufacturer calls Corten steel. That designation describes the colour, not the housing material: the body is powder-coated cast aluminium, with transparent safety glass over the light openings. An uninterrupted front and the absence of decorative arms give it a restrained, Scandinavian appearance.
A small body with two-way light
The face measures 13 × 13 cm and the depth is 5 cm. Compare those dimensions with the intended section of façade, allowing for the wall surfaces above and below the fitting where its light will fall. The two-way, diffused distribution is intended to illuminate vertical surfaces rather than act as a narrow spotlight for a distant object. It can also be considered for a terrace or balcony wall when lighting the façade is part of the scheme.
Neutral white and adjustable power
Two LED modules are part of the fitting, so there are no screw-in bulbs to choose. A colour temperature of 4000 K provides neutral white light. The datasheet lists a luminaire output of 1167 lm at a rated power of 15 W. A switch on the driver allows power to be set between 10.9 and 15 W; the factory setting is 10.9 W. The maximum rating therefore should not be read as the consumption at every setting.
Phase-cut dimming is a separate control feature. Both trailing-edge and leading-edge operation are specified. Use that information when planning the control circuit rather than assuming compatibility with any LED dimmer.
Installation and future servicing
The light takes a 220–240 V supply and is Class I, requiring a protective earth connection. Its IP65 rating supports outdoor use. Mounting uses two 5 mm holes with a spacing of 63 × 112 mm. Installation must follow the supplied instructions and be carried out by a suitably qualified person. The LED source and control gear can be replaced by a professional service, rather than being changed by the user like an ordinary bulb.