Norlys Alta 1477BL bollard light with E27 LED bulb 5.9 W 2700 K, 49 cm, black RAL 9005

Alta 1477BL is a 49 cm bollard light with a plain cylindrical body and a head of horizontal louvres over an opal diffuser. The body is hot-dip galvanised steel finished in black RAL 9005. An E27 LED bulb is included, so the bollard lights up as soon as it is connected.

Where a 49 cm bollard fits

A 15 × 15 cm footprint and 49 cm height make it a low fitting for a path, garden steps or the edge of a driveway: the light falls on the ground rather than into the eyes of passers-by. The maker intends it for private grounds — garden, terrace, driveway — and for the surroundings of hotels and restaurants. The top shield sends light sideways and down: ULOR is 10% and the BUG rating B0-U1-G0, so little light escapes above the fitting.

It fixes through three ø9 mm holes set at 120° on a ø65 mm circle. No anchor is included; the options are the 205 concrete-in anchor, the 206 ground anchor, the 206S concrete-foundation adapter and the 3080GA and 3086GA mounting adapters. The terminals take cable up to 3 × 2.5 mm² and allow the supply to loop through to the next fitting, so a row of bollards along a path runs on one supply line. Round-sheathed cable up to 12.5 mm in diameter fits the gland.

What light Alta 1477BL gives

The supplied Philips LED E27 bulb, A60 shape, draws 5.9 W and gives 2700 K — warm, slightly yellow light — with 806 lm. The fitting itself emits 100 lm, because the diffuser and shield hold back most of the light. This is orientation lighting that marks a path and its edges, not a lamp for lighting a whole yard. The user can replace the bulb; a new one must fit the A55–A60 shape.

The fitting dims on a phase dimmer, either trailing edge (TE) or leading edge (LE), so both common dimmer types work. A replacement bulb has to be marked dimmable.

Build and protection

IP65 means dust-tight and protected against water jets, so it can stand in the open without cover. The IK08 impact rating guards against an accidental knock, and protection class II means double insulation with no earth conductor. The bollard weighs 6.7 kg and has a silicone gasket. The Alta range also includes 1477GA in a hot-dip galvanised finish.