Norlys Asker 5208AL is a light grey garden bollard with a rectangular head projecting from its upright body. Its included LED produces warm white 3000 K light through a diffuser on the underside of the head, directing the light downwards.
Planning its position beside a path
The 55 cm height can be compared with low planting and the edge of a terrace. The head has a 20 × 11 cm footprint, so check its projection against the available clearance beside the walkway before fixing the bollard. Positioning the upright beside the paved area places the light below the head.
The fitting is permanently fixed to a prepared base. Choose an anchor or adapter for the actual mounting arrangement and purchase it separately; Norlys lists solutions for ground and foundation installation. Set out the fixing position and cable route before completing the paving around the bollard.
Warm white light below the head
The complete fitting delivers 642 lm and draws 8.5 W; use this luminaire output when planning brightness along a path or beside the terrace. Its 3000 K light is warm white. Compare it with lighting at the entrance and on the facade when selecting several light points for the same outdoor space.
The transparent polycarbonate diffuser has a light-spreading structure and is UV stabilised. The head covers the source from above, with a hemispherical downward distribution. Choose the spacing between fittings according to the width of the route and the light required on its surface.
DALI2 controls and servicing
This 5208AL version includes both the LED module and a DALI2 driver. Control requires a suitably prepared DALI2 installation, so plan the control cables and system devices before the bollard is fitted. Replacement of the LED and control gear is a job for a professional service technician.
The die-cast aluminium body is powder coated in light grey AL RAL 9006. Its plain, unornamented form suits modern and minimalist settings. The IP65 enclosure is intended for outdoor use, while Class I requires a protective earth connection; a qualified installer should carry out the electrical work.