NORLYS Asker Big Pro 5049AL is an outdoor wall light with a wide rectangular body in light grey RAL 9006. Two outlets direct light upwards and downwards, while the included LED source produces very warm white 2700 K light.
Two directions of light on the facade
The fitting lights the wall both above and below its body, creating two accents from a single mounting point. The manufacturer specifies it for walls, facades and other architectural schemes. When selecting its position, allow space for both distributions and take account of cornices or recesses.
The complete fitting delivers 1144 lm and consumes 13.3 W; this is the combined output, rather than a separate rating for each outlet. The 2700 K colour temperature gives warm light with a slightly yellow tone. Brightness regulation should be planned within a DALI2 system with the appropriate control installation.
Dimensions and materials
The front face is 30.2 cm wide and 12.5 cm high, and the body projects 12.1 cm from the wall. Compare these dimensions with the width of a pillar and the available facade area. Its horizontal form remains a visible part of the wall when the light is switched off.
The body is powder-coated cast aluminium, with clear, textured, UV-stabilised polycarbonate covers. A silicone gasket and an EPDM cable gland complete the construction. IP65 provides protection against dust and water jets when the fitting is correctly mounted and the connection properly sealed.
Prepare the mounting and connection
The manufacturer provides for mounting through an intermediate plate with two adjustable 5 × 10 mm slots spaced 45 mm apart, or directly through two 5 mm holes with 68 mm spacing. Match the mounting method to the surface and any existing fixing points. Decide on the arrangement before preparing the holes.
The fitting operates on 220–240 V AC and is Class I, requiring a protective earth conductor and installation by a qualified electrician. A round cable 7–10.5 mm in diameter is specified for the connection. The LED source and electronic driver are included, and a professional service technician replaces them after the power supply has been disconnected.