The NORLYS Energy Distributor 2901AL is a low garden power post with two type E (Uni) sockets, each rated at 16 A. Its extruded aluminium body is powder-coated in light grey colour RAL 9006. This is an outdoor electrical connection point, not a garden light.
Socket compatibility and load limits
The two sockets sit side by side, each beneath its own hinged cover. Check that the plugs on your intended appliances are compatible with type E sockets before choosing this version. The installation manual specifies a maximum load of 1800 W for socket A and the same limit for socket B. The 16 A marking does not override that stated power limit; connected equipment must also suit the capacity and protection of the installation as a whole.
The post is intended for a 220–240 V supply and is a Class I electrical product, requiring a protective earth connection. Electrical installation must be carried out by a suitably qualified person.
Allow space for the post and plugs
The post stands 25 cm high and is 12 cm wide, with an overall depth of 14 cm including the projecting sockets. Compare these dimensions with the proposed mounting position, allowing access to open the covers and insert plugs. Its plain rectangular body suits a restrained, contemporary garden or terrace layout.
The documented mounting pattern comprises four 7 mm holes at 64 × 64 mm centres. The instructions show fixing to a wooden surface and installation using a concreting anchor. Anchor 2934 is sold separately, and mounting screws are not included. Prepare the fixing arrangement for the actual supporting surface rather than treating the post as a freestanding extension lead.
Outdoor installation conditions
IP54 provides the corresponding level of dust protection and protection against splashing water, not immersion. The stated maximum ambient temperature is +35°C. Follow the installation instructions for the supporting surface, cable entry and connection. Position the post and connected leads so that access to the sockets does not obstruct a pedestrian route.