NORLYS Lillehammer 2290WH white LED outdoor wall light

NORLYS Lillehammer 2290WH is a white outdoor wall light with upward and downward beams of different widths. Its cast-aluminium body is powder-coated in RAL 9003, with safety glass protecting the optics. Flat sides and a plain rectangular outline suit modern, minimalist and Scandinavian architectural settings without adding decorative detailing to the façade.

Choose the direction of the narrow beam

This version combines a narrow 4° beam with a wide 60° beam. It can be installed with the narrow beam pointing upwards and the wider beam downwards, or the other way round. The choice is made when mounting the fitting. Unlike a symmetrical up-and-down light, it produces different patterns on the wall above and below the body.

Two integrated LED modules provide warm white light at 2700 K. The complete fitting consumes 8 W and delivers 119 lm. The separate figure of 1008 lm refers to the light sources, not the output leaving the assembled luminaire. Use the 119 lm luminaire output when planning the installation. This is an architectural wall accent rather than an automatic substitute for the lighting needed across an entire outdoor area.

Allow space for the light pattern

The body measures 18.5 × 11 × 8 cm. Before choosing its position, check the space for the fitting itself and the uninterrupted wall above and below it. A façade beside a terrace or balcony can provide a setting for this directed effect. Its IP65 rating means it is dust-tight and protected against water jets; it does not make the fitting suitable for immersion.

Dimming and maintenance

Lillehammer operates on a 220–240 V supply and supports Trailing Edge phase-cut dimming. Any chosen dimmer needs to suit that control method. There is no separate screw-in bulb to buy: the LED sources are incorporated into the fitting. Replacement of those sources and the control gear is a professional service operation, not a routine bulb change. Installation should also be carried out by a suitably qualified installer following the manufacturer's instructions.