NORLYS Lillehammer DC1582GR outdoor LED wall light, graphite RAL 7016, 24 V DC, 3.6 W 3000 K, 60° downlight, IP65

Lillehammer DC1582GR is a box-shaped NORLYS outdoor LED wall light, 18.5 cm high, 8 cm wide and 11 cm deep, made of cast aluminium powder-coated in graphite RAL 7016. Light leaves only downwards, through a clear safety-glass window in the underside. The manufacturer designed it for lighting walls and facades.

What light it gives

The 3.6 W Cree LED module produces 532 lm, and 115 lm leaves the luminaire in a 60° cone. This is accent light: it draws a bright patch on the wall below the fitting and marks an entrance or a path, but it will not light a whole yard. 3000 K is warm white, CRI 80, energy class D. No light goes up or sideways (ULOR 0%, BUG B0-U0-G0), so the fitting does not dazzle passers-by.

24 V DC supply and servicing

This is the low-voltage version: the module runs on 24 V direct current and needs an external, voltage-stabilised driver, which is not included. The driver is sized to the number of fittings on the circuit, and dimming is done on its side – the LED module is designed for it. Protection class III means a safety extra-low voltage supply with no protective earth conductor.

The LED module is replaced by a professional service – the manufacturer stocks service kit ZS1582XX0A16 and maintenance kit 99ZX0009. The module is rated at over 102,000 h (L80).

Installation

The fitting is screwed to the wall through two ø5 mm holes spaced 45 × 130 mm and weighs 1.6 kg. The terminals take conductors up to 2 × 2.5 mm², or up to 2 × 1.5 mm² when looping through to further fittings; the EPDM gland accepts round cable 7–10.5 mm in diameter. IP65 means a dust-tight housing protected against water jets, and IK08 impact resistance up to 5 J.