Nowodvorski PUEBLA 9513 outdoor LED ceiling light, graphite, 20 cm, 3000 K Promo Code 🚀- NOVO15 until the end of Oct 25

Nowodvorski PUEBLA LED 9513 is a low-profile outdoor ceiling light with a graphite body and a white diffuser band surrounding its dark centre. Painted aluminium and PC polycarbonate form a rounded-square housing. Its LED light source is integrated and included, so there is no separate bulb to select for this version.

A 20 cm footprint without a hanging cable

The fitting measures 20 cm long, 20 cm wide and 4.5 cm high. Direct surface mounting keeps it close to the ceiling rather than suspended in the space below. Before choosing a position, compare its footprint with the available mounting surface and the location of the electrical outlet. This is particularly useful under a small entrance canopy or along a narrow balcony ceiling, where the usable surface may limit placement.

The rounded corners, plain surfaces and graphite-and-white contrast suit modern, minimalist and modernist settings. When illuminated, the perimeter band gives a different appearance from a fully luminous panel. The dark central area remains a visible part of the design rather than becoming a broad glowing surface.

Warm light for the entrance or terrace

The 12 W source provides 540 lm at 3000 K with a 110° beam angle. This is warm-white light with a broad distribution, not the narrow beam of an accent spotlight. Consider it for an entrance area, terrace, balcony or gazebo with a suitable mounting surface. For a larger space, assess the output alongside mounting height and the number of fittings: a wide beam angle alone does not guarantee sufficient brightness across an entire terrace.

IP54 indicates the defined level of protection against dust and splashing water. It does not mean the fitting can be submerged or exposed to every form of water contact.

Package contents and installation

The package contains the fitting, instructions, mounting instructions and a mounting kit. It is supplied from ~220–230 V and belongs to protection class I, requiring a proper protective-earth connection. Installation and connection must be carried out by a qualified person following the manufacturer's instructions. Clean only after switching off and allowing the fitting to cool. Use a damp cloth, avoid solvents and keep moisture away from electrical connections.