Nowodvorski SOFT LED 120X6 7537 white pendant light 125 cm

Nowodvorski SOFT LED 120X6 7537 is a white pendant light built around one elongated body rather than separate arms and shades. Lacquered aluminium and a PMMA cover give it a simple linear form. This exact finish is identified as White P004 RAL 9003, while the narrow profile and visible suspension wires suit modern and minimalist interiors.

Plan around the actual 125 cm length

The body is 125 cm long and the maximum overall height is 156 cm. The shade is 6 cm high and 6 cm wide; the manufacturer lists an overall fixture width of 8 cm. 120X6 is the catalogue designation, so use the actual 125 cm measurement when comparing the light with your furniture.

Its elongated shape can be positioned along a dining table, kitchen island or desk. Compare the body length with the surface below, then check your ceiling height and the location of the electrical connection. The installation drawing shows adjustment of the suspension wires during fitting, allowing the drop to be set for the space. The maximum overall height does not specify the required distance above a tabletop. Visually, the white body forms a continuous line rather than a group of separate lighting heads.

An included, replaceable LED tube

The fitting takes one LED TUBE T8 light source with a maximum permitted rating of 22 W. A light source is supplied; the manufacturer identifies tube 7502 and a warm white colour temperature of 3000 K. The tube can be replaced without replacing the whole fixture. Any replacement must match the required construction and voltage and stay within the permitted wattage. The 22 W limit is not a statement of the power consumption of every compatible replacement.

Installation and surface care

This pendant is hardwired to a 220–230 V installation using a mounting bracket. A qualified electrician should fit it according to the instructions. The package contains the fixture, instructions and an Allen key. Clean the surface with a damp cloth only after switching off and allowing the light to cool. Keep moisture away from electrical connections and let the fixture dry completely before switching it on again.