Oslo 245 is a 118 cm post light in which the tube curves over and hangs the head above the path rather than standing it upright on the post axis. The shade is three overlapping flat discs, with a clear cylinder holding the light source protruding below them. The footprint measures 28.5 × 48 cm, so the overhang has to be allowed for when setting the distance from the path edge.
How it lights
Norlys classes this fitting as an exposed light source — the lamp is not hidden behind an opal diffuser but visible through the clear polycarbonate. The character of the light therefore depends on the bulb you choose: a clear lamp draws hard highlights across the discs, an opal one spreads more softly. The discs shield the source from above but not completely — the manufacturer quotes ULOR 9.19%, the share of flux above the horizontal, and the BUG classification B0-U2-G1 confirms no backlight with a small glare component.
Weather resistance
The structure is hot-dip galvanised steel with a powder coat on top — two independent protective layers, which matters for a fitting that stands in the ground, exposed to lying snow and rising damp. The lens is UV-stabilised polycarbonate, so it does not yellow or grow brittle. IP55 covers dust and water jets.
Light source, wiring and installation
The fitting takes an E27 lamp up to 9 W LED, which is not supplied — you choose the bulb yourself and replace it without a service call. The post is anchored with the included mounting anchor: three ø7 mm holes spaced every 120° on a ø139 mm circle. Terminals accept conductors up to 2 × 2.5 mm², and the supply can be looped on to the next fitting with up to 2 × 1.5 mm² in round cable of up to 12 mm outside diameter. The luminaire is protection class II, so no earth conductor is required.
Specification
- Manufacturer index: 245BC
- EAN: 7042890024523
- Luminaire type: post light fixture
- Luminaire dimensions: 28.5 × 48 × 118 cm
- Box dimensions: 41 × 30.5 × 24.5 cm
- Net weight: 3.82 kg, gross weight: 5.5 kg
- Lampholder: E27, light source replaceable by the end user, not included
- Light source power: LED max. 9 W
- Voltage: 220–240 V
- Ingress protection: IP55
- Protection class: II
- Light distribution: exposed source, ULOR 9.19%, BUG classification B0-U2-G1
- Material: hot-dip galvanised and powder-coated steel, clear UV-stabilised polycarbonate lens
- Mounting: mounting anchor included, 3 holes ø7 mm on a ø139 mm circle every 120°
- Terminals: max 2 × 2.5 mm², loop-through max 2 × 1.5 mm², round cable up to ø12 mm
- Collection: Oslo