Asker MD1529AL is an outdoor wall light shaped as a horizontal rectangular block of cast aluminium, powder-coated in light grey RAL 9006. It shines up and down at once through a clear, textured, UV-stabilised polycarbonate diffuser. A built-in microwave motion sensor with a daylight switch turns it on when it detects movement.
Motion sensor – settings after installation
The MC119S sensor leaves the factory with full detection range (100%), a 5 s hold time and the daylight threshold switched off. Set like this, it also reacts in daytime and goes off seconds after movement stops. Norlys advises adjusting the sensor after installation – the daylight threshold if the light should only switch on after dark, and the hold time. In standby the luminaire draws 0.1 W.
What light it gives
The integrated LED module draws 8.8 W and the whole luminaire 9.4 W. The source produces 773 lm and the luminaire 241 lm, i.e. 25.6 lm/W. Half of the flux goes upwards (ULOR 50%, BUG rating B0-U3-G0) and half downwards, so the wall shows two cones of light, above and below the fitting. It accents a façade rather than lighting a whole driveway. 2700 K is a warm, slightly yellowish white, and CRI 80 is typical colour rendering outdoors.
Dimensions, mounting and wiring
The body is 22.5 cm wide and 11 cm high and projects 8.5 cm from the wall. The luminaire weighs 1.44 kg and is fixed through two ø4.5 mm holes spaced 180 × 60 mm; other accessories are sold separately.
It runs directly on 230 V mains and, being protection class I, needs a protective earth. The terminals take conductors up to 3 × 2.5 mm², or up to 3 × 1.5 mm² when looped through; an EPDM gland seals round cable of 7–10.5 mm. The inrush current is 35 mA for 60 ms, so one B 16 A breaker can supply up to 250 fittings.
Durability and service
IP65 lets the light stay on the wall without a canopy, and IK08 protects it against knocks within arm's reach. According to TM-21, the module keeps more than 70% of its flux after 55,000 h. Only a professional service replaces the LED module and control gear (repair kit ZS1529zx0009). Norlys intends Asker for lighting walls and façades, and the plain form suits modern, minimalist architecture.