Voss 5128GR is a Norlys outdoor wall light shaped as a rectangular block of cast aluminium, powder-coated in graphite (RAL 7016). It shines in one direction only – upwards, through a pane of clear safety glass set into the top face of the body.
What light Voss 5128GR gives
Norlys specifies a 4° beam aimed straight up (ULOR 100 %). A beam this narrow draws a tall, slim stripe of light on the wall above the fitting – accent lighting for a facade and its architectural details, not lighting for a doorway, steps or a driveway.
The LED module is rated at 4.5 W and 767 lm, and 55 lm leave the luminaire at a consumption of 6.4 W. At 4000 K the light is neutral white without a yellow cast, under which render, concrete and timber keep their natural colour; Ra 80 and a tolerance of SDCM3 mean that several fittings on one wall shine in the same shade.
Size and wall mounting
The fitting is 18 cm high and 16 cm wide and projects 27 cm from the wall – worth comparing with the width of the path below. It weighs 4.57 kg and fixes through two ø7 mm holes spaced 100 x 80 mm, as described in the supplied manual.
The terminals take conductors up to 3 x 2.5 mm², and fittings can be looped through with cable up to 3 x 1.5 mm², so several wall lights can run from one circuit. The cable gland accepts round cable from 7 to 10.5 mm in diameter. As a protection class I luminaire it must be connected to protective earth.
Build, light source and dimming
The housing is powder-coated cast aluminium, the window is clear safety glass, and a silicone gasket with an EPDM cable gland keeps it sealed. IP54 protects against dust and against water splashed from any direction, so the light can hang on an unsheltered wall; impact resistance is IK06.
The LED module and driver are built in and come with the luminaire – there is no bulb to buy. The source is not user-replaceable: Norlys allows module and driver replacement only by a professional service (service kit ZS5128zx0C010). The module is rated for more than 102,000 h (L80) and the driver for 50,000 h. The fitting can be phase-dimmed with a trailing-edge (TE) dimmer; the built-in driver is a Philips Xitanium TE.