This is a ready-assembled set built on the KLUŚ PDS-O aluminium profile with a round cross-section, suspended on two thin cables. The profile is one metre long and just 18.5 mm wide – hung over a worktop it reads as a line of light rather than as a fitting.
Note: the driver is not included
The tape runs on 12 V DC, so you need a separate 12 V power supply rated with some headroom above 14 W. It is not in the box – this is the most common misunderstanding with LED profiles, so budget for it.
The light
Warm-white diodes give 800 lm at 14 W, and the milky cover diffuses them along the whole metre – you see a single even glowing line rather than individual dots. This is a fitting for lighting a kitchen worktop, an island, a desk or a shelf, where evenness matters more than raw output.
The PDS-O profile
The profile is anodised aluminium, which matters in practice: the metal draws heat away from the tape and extends its life. The round section lets you rotate the fitting and aim the light at a chosen angle after installation. The cover clips on, so replacing the tape does not mean dismantling the whole thing.
Specification
- Profile length: 1 m
- Profile section: round, 18.5 × 15.8 mm
- Power: 14 W
- Luminous flux: 800 lm
- Colour temperature: warm white
- Supply: 12 V DC – driver not included
- Cover: milky (diffusing)
- Material: anodised aluminium
- Mounting: suspended on cables
- Protection rating: IP20 – dry rooms