POINTS pendant lamp P050PL-L40B4K Maytoni

Maytoni Points P050PL-L40B4K is a black linear LED pendant with an aluminium body. A row of recessed light outlets runs along the underside of the narrow bar, rather than a continuous opal cover. This version pairs a length of 106.5 cm with neutral white light at 4000 K.

A slim bar above a long surface

The body is just 3.3 cm wide and 7.5 cm high. From the front it forms a straight black line; viewed from below, the separate optical compartments become visible. Its geometry, without decorative arms or glass drops, suits modern, modernist and minimalist interiors.

Compare the metre-long span with your dining table, kitchen island or desk before choosing a position. This pendant can provide directed lighting over such surfaces in a home, office, hotel or restaurant. In a living room or bedroom, think of it as lighting for a particular area rather than assuming that the long body will evenly illuminate the whole room.

Neutral light with a narrow beam

The integrated LED source is rated at 40 W, with a stated luminous flux of 3400 lm. There are no separate screw-base bulbs to select for this version. Its 4000 K light is neutral white, so consider the contrast with warm 2700–3000 K lighting if other fittings will illuminate the same space.

Maytoni specifies a 25° beam angle and a colour rendering index of CRI 90. The narrow beam directs light towards the surface beneath the bar rather than spreading it widely in every direction. Colour rendering matters when viewing objects and materials on that surface. This model is not dimmable, so it is not intended for brightness adjustment using an ordinary dimmer.

Check the suspension dimensions

The documentation distinguishes the body height from the overall height and gives an overall range of 7.5–280 cm. Check the distance from the ceiling to the planned surface and allow for any walking route beneath the fitting. The installation drawing shows two suspension wires and a separate power feed; this is a pendant, not a track-mounted luminaire. It operates on 220–240 V AC. Its IP20 rating and Class II protection are installation parameters to consider when selecting the mounting location.