The Stellar2 100W is an LED street light with a flat, elongated head in a grey aluminium housing. It mounts on a wall or on a 60 mm diameter pole, and the head tilts over a 200° range. The LEDs are built in — the fitting has no lamp holder and no replaceable bulb.
How much light, and what kind
Drawing 100 W, the fitting produces 11,000 lm, of which 9,800 lm falls within the 120° cone below the head. An efficacy of 110 lm/W means a lot of light per watt; over 1,000 hours of use it consumes 100 kWh. Its energy label puts it in class E.
4000 K is neutral white — neither yellowish nor bluish. With CRI above 80, the colours of cars, facades and greenery look natural. The beam spreads 120 × 80°, so the pool of light is stretched in one direction; aimed along a drive or a car park, it covers a longer strip. The fitting cannot be dimmed.
Mounting and size
The head measures 612 × 221 × 99 mm. The bracket fits a 60 mm pole; the pole itself is chosen separately. The supply cable runs entirely inside the housing, and once installed the fixing holes sit underneath, covered by the body, so changing the tilt does not chafe the cable. It connects to a 220–240 V mains supply.
Where it fits
The manufacturer intends the Stellar2 for yards and squares, private car parks, garages, properties, terraces and outbuildings. The housing is rated IP66, meaning it withstands powerful water jets and keeps dust out, and IK08 for impact resistance. It operates from −25 to +50 °C, so it can stay outdoors all year round.
The manufacturer rates LED life at 30,000 hours until the output falls to 70% (L70B50), and 15,000 switching cycles. The Stellar2 series also includes 60 W, 150 W and 200 W versions with the same light colour.