Zambelis 25394 LED mirror, anodized gold, 120 × 70 cm, 30 W, 3000/4000 K, IP44 Promo Code - ZAM10 until the end of Oct 30

The Zambelis 25394 is a rectangular wall mirror with built-in LED lighting and an anodized-gold aluminium frame. A narrow border and light strip surround the reflecting surface, with a touch-control point on the mirror itself. This particular version measures 120 × 70 cm and projects 5.5 cm from the wall.

Choose the orientation before installation

The manufacturer permits both horizontal and vertical mounting. In landscape orientation, allow 120 cm of wall width; turned upright, the same measurement becomes its height. Compare both arrangements with the space above your washbasin or beside your dressing area before choosing the position. Include the 5.5 cm depth in your layout and check that the control remains within reach.

Straight edges and a slim gold outline give the mirror a contemporary, restrained appearance rather than an ornate frame. The finish can pick up a matching metal tone in taps or handles, while the rectangular surface establishes a clear geometric shape. You do not need to reproduce the complete room shown in the manufacturer's photograph to use that visual relationship.

Warm or neutral white, with touch dimming

The integrated LED module is rated at 30 W. The two specified colour temperatures are 3000 K and 4000 K, with stated outputs of 2185 lm and 2390 lm respectively. These provide warm-white and neutral-white settings; the specification does not establish continuously variable colour temperature between them. The touch switch supports brightness adjustment, and the power-off memory function retains the last setting. No separate screw-in bulb is needed.

Bathroom placement and electrical connection

Zambelis identifies bathrooms and dressing areas as intended uses and specifies IP44 protection. That rating does not remove the need to check the permitted installation position near water. The mirror takes a 220–240 V supply and is a Class I appliance. Its instructions require installation by a qualified electrician with the supply switched off. Replacement of the built-in LED source must be carried out by the manufacturer, its service agent or a similarly qualified person.