Zambelis E384 natural concrete LED bollard light 2×8 W 3000 K 70.4 cm IP65 Promo Code - ZAM10 until the end of Oct 30

Zambelis E384 is a natural concrete bollard light with a flat circular head and two integrated LED modules. Its rectangular upright supports a wider disc, with the light panels positioned beneath the overhang. The fine surface texture remains visible; the manufacturer also lists metal and glass among the construction materials.

Planning space beside a path

The bollard stands 70.4 cm high and its head measures 28 cm in diameter. It is a low-level outdoor fitting rather than a tall garden lamppost. Allow for the projecting head when deciding its position, not just the narrower upright. The datasheet gives the base dimensions as 10 × 28 cm, with a thickness of 0.5 cm.

The manufacturer identifies garden paths and outdoor spaces as intended uses. E384 can be planned beside an approach to a building, a terrace or the edge of a driveway, including hotel grounds. Keep pedestrian routes and vehicle paths clear of the fitting. Its unornamented geometry and exposed concrete texture suit modernist and minimalist architecture, with a visible material surface rather than a traditional lantern enclosure.

Warm white light from two modules

The two built-in LEDs are rated at 8 W each. A colour temperature of 3000 K gives warm white light, and the manufacturer specifies a luminaire output of 780 lm. The luminous panels sit on either side of the upright below the head. This arrangement differs from bollards that have a tall illuminated diffuser running along the body.

There is no screw-in bulb to choose because the light sources are integrated. E384 is not dimmable, so it should not be specified for brightness adjustment through a dimmer. According to the instructions, replacement of the integrated source must be carried out by the manufacturer, its service agent or a similarly qualified person.

Outdoor electrical installation

The fitting requires a 220–240 V supply and is protection class I. Installation must be performed by an electrician with the supply switched off. Its IP65 rating means dust-tight construction and protection against water jets, not suitability for immersion. The instructions prohibit covering the luminaire; allow for that requirement when planning planting around it.