Antigo 8100 three-phase surface-mounted lighting track white 2 m 230 V

Antigo 8100 is a white, 2 m surface-mounted lighting track for the Antigo three-phase system. Its matt finish and straight cross-section form a visible linear route for compatible luminaires rather than a separate lamp with a shade. The product page specifies painted steel, while the system catalogue also lists aluminium.

Planning the two-metre section

The track cross-section is 35.2 mm wide and 35.5 mm high. These measurements help you assess the space occupied by the profile below the ceiling surface. Article 8100 is the surface-mounted version, not the recessed track in the same collection. Its 2 m length describes one section of the installation, and the manufacturer permits tracks to be cut to the required length.

Compare the intended route with the power-feed position and any points where the layout needs to turn. The system also offers one-metre sections and connection accessories for layouts beyond a straight line. Choose the components for the complete route, rather than matching the track colour alone. The small cross-section does not describe the length of an attached luminaire.

A system component, not a complete light fitting

The track belongs to a 230 V system. It does not determine colour temperature or luminous flux; these depend on the compatible luminaires fitted to it. The collection supports directional or diffuse lighting. When assembling an installation, check that luminaires, power feeds, connectors and end pieces are suitable for the Antigo three-phase system. This length of track should not be treated as a ready-to-use lighting kit.

A matt white line within the interior

The restrained profile suits modern and minimalist schemes, as well as loft interiors with visible technical installations. It can be considered in lighting plans for living rooms, dining rooms, bedrooms, kitchens, corridors, offices and commercial interiors. Select luminaires for the activity and light distribution required in each area: the track establishes their route, but does not replace that decision. This is an interior installation component rated IP20.