Halmstad 1410BL is an 85 cm bollard light with a 12 cm square cross-section, whose column is made of painted Scandinavian pine in a dark wood tone. The head, with a milky PMMA diffuser surrounded by horizontal louvres and covered by a cap, and the foot are hot-dip galvanised steel powder-coated in black (RAL 9005).
Which light source you need to buy
The bollard has an E27 socket and takes one A55–A60 shaped LED bulb of up to 9 W. No light source is included, so you choose the colour temperature and brightness yourself — warm light at 2700–3000 K is usually enough for a garden path. The user changes the bulb without a service visit, and dimming depends on the bulb and dimmer you pick, as the fitting has no control of its own.
How the light spreads
The milky diffuser spreads light sideways, while the louvres and the cap partly shade it from above. According to the datasheet the ULOR is 47%, so almost half of the output goes above the level of the fitting: the bollard lights up its surroundings all round rather than shining only downwards. At 85 cm this is orientation light along a path, by steps, at the edge of a driveway or at the way onto a terrace.
Installation and durability
The bollard is screwed to the ground through three ø9 mm holes set 120° apart on a 65 mm circle. The 3086GA0009 and 3080GA0009 mounting adapters, the 205ZX0010 element for setting in concrete, the 206GA0010 element for setting in soil and the 206GA0S10 concrete foundation adapter are bought separately — the choice depends on whether the bollard stands on concrete or in the ground. The terminals take wires up to 3 x 2.5 mm² and allow looping the supply on to the next fitting, and the round cable may be up to 12.5 mm in diameter.
The fitting is protection class II, so it does not need a protective earth. IP65 lets it stand outdoors without any cover, and IK10 is the highest impact resistance on this scale — important by driveways and in public areas. The manufacturer intends the bollard for private grounds and public areas; the plain, square form of wood and black steel has a Scandinavian character. The diffuser service kit (06295000) and the gasket (08295000) are available as spare parts.