Stockholm 287BC is a low bollard light with a wide, flat hat 35 cm across. Under the hat sits a round head of vertical rods and horizontal rings, holding a clear PMMA cylinder. The body is hot-dip galvanised steel with a black finish and a copper patina.
Dimensions and mounting
The bollard is 47.5 cm high, and the hat sets its largest dimension at 35 x 35 cm in plan. That height is close to a flower bed or path edging, so the light covers the area just above the ground rather than shining from above like a lamp post. The net weight is 4.4 kg.
It is fixed with the mounting anchor supplied, through three 7 mm holes spaced at 120° on a 120 mm circle. The terminals take conductors up to 2 x 2.5 mm², and the supply cable can be up to 12 mm in outer diameter, a figure worth checking against the buried cable before ordering.
Light source and light direction
The head holds one E27 socket for an A55–A60 shaped LED bulb of up to 9 W. The bulb is not included, so you choose its colour and brightness, and changing it needs no service visit. The manufacturer gives the A55–A60 shape, so wider globes and long candle bulbs are not intended for this fitting.
The cylinder is clear and the bulb is not shielded, so light leaves the head mainly sideways, towards the path and lawn. The manufacturer states that about 33% of the light goes upwards under the hat, which means the bollard also lights its own head and hat and stays clearly visible after dark.
Outdoors and where to place it
IP54 means protection against dust and splashing water from any direction, so the bollard can stand in the garden without cover. The fitting is protection class II and needs no earth conductor. Norlys offers the cylinder (service kit 06281002) and the gasket 08281001 as spare parts.
The manufacturer describes Stockholm 287 as a Scandinavian design for lighting gardens and terraces. Several bollards along a path or at the edge of a terrace mark the way and the edge of the paving after dark.