Stockholm 297GA bollard, hot-dip galvanised steel, 85 cm, E27 – NORLYS

Stockholm 297GA is a round bollard, 85 cm tall and 17 cm in diameter, made of hot-dip galvanised steel. The zinc coating is not painted, so the bollard has the matt, silvery-grey look of bare zinc. The head is a clear PMMA diffuser surrounded by horizontal rings and sealed with a silicone gasket.

Which bulb to choose

The fitting has an E27 socket and takes an LED bulb of up to 9 W in the A55–A60 shape — a wider globe or a long candle bulb will not fit under the diffuser. The bulb is not included, so you choose the colour and brightness of the light yourself; it is replaced without a service visit.

The diffuser is clear and the light spreads evenly in all directions. The manufacturer states a ULOR of 51.68%, meaning about half of the light goes above the head, so the bollard lights its surroundings and itself rather than only the ground beneath it.

Mounting and wiring

The bollard weighs 10.55 kg and is fixed through three ø9 mm holes spaced at 120° on a ø56 mm circle. The anchoring parts are sold separately: concrete anchor (art. 205), ground anchor (art. 206), concrete foundation adapter (art. 206S) and mounting adapters (art. 3080GA and 3086).

The terminals take conductors up to 3 × 4 mm² and allow loop-through to further luminaires at up to 3 × 2.5 mm², so several bollards along a path can share one supply line. The cable gland takes a round cable up to 12.5 mm in diameter. It is a protection class II luminaire, so no earth conductor is needed. IP65 and IK10 impact resistance allow it to stand by a driveway or in a public area without extra protection.