NORLYS Stockholm 1265BL Bollard Light, Black RAL 9005, 85 cm, LED 8.5 W 3000 K, Dimmable

Stockholm 1265BL is an 85 cm bollard light with a round tube 17 cm in diameter. The opal PMMA diffuser in its head is guarded by horizontal rings and vertical ribs, and the hot-dip galvanised steel body is also powder-coated black (RAL 9005). The manufacturer intends it for gardens, private grounds and the surroundings of buildings.

What light it gives

The 6.7 W LED module produces 1059 lm, and 342 lm leave the fitting at 8.5 W: orientation light along a path or driveway, not a floodlight. The diffuser spreads it evenly all around and roughly half of the output goes upwards (ULOR 49.94%, BUG B0-U3-G1), so the bollard also lights nearby plants and walls. 3000 K is warm white, and CRI 80 with SDCM 3 keeps the tint consistent across several bollards in a row.

The fitting dims with a phase dimmer and works with both trailing-edge (TE) and leading-edge (LE) types. The manufacturer rates the module at over 50,000 h to 80% output (L80) and over 38,000 h to 90% (L90), and the driver at 50,000 h. The LED module and driver are replaced by a professional service, and Norlys supplies a repair kit for this fitting.

Installation

The bollard is bolted down through three ø9 mm holes set 120° apart on a 65 mm circle. Concrete-in or ground anchors, a concrete foundation adapter and mounting adapters are sold separately to suit the base. The terminals take conductors up to 2 × 4 mm² and allow the next fitting to be supplied in a loop (up to 2 × 2.5 mm²), and the cable entry takes a round cable up to 12.5 mm in diameter.

It is a class II luminaire, so no protective earth conductor is needed. IP65 means a dust-tight housing protected against water jets, and IK10 is the highest impact-resistance class, which matters beside a driveway or pavement where the bollard may be knocked. The fitting weighs 8.78 kg.