Egersund Park 6106AL is a post-top lantern head: a slim 12 cm diameter cylinder with a clear PMMA diffuser, closed at the top and bottom by a cast-aluminium housing powder-coated in light grey (RAL 9006). The whole luminaire is 52 cm tall, 33 cm of which is the illuminated section. The LED module and driver are built in; no pole is included.
What it stands on and how it is wired
The head is fixed according to the installation instructions, and the parts beneath it are chosen separately: Norlys offers mounting adapters 6133GA0009 and 6132GA0009 and the concrete-in anchor 6130XX0009. Adapter 6133 is a hot-dip galvanised steel ground anchor intended for Egersund Park luminaires.
Included is a 2.7 m H05VV-F 2 × 1 mm² cable ending in a sealed IP68 junction box, so the connection to the supply stays watertight. The terminals take conductors up to 2 × 4 mm² and allow several lanterns to be looped together; the gland accepts round cable of ø8–12 mm or ø10–14 mm. The fitting is protection class II, so no protective earth is required. It weighs 1.96 kg.
What light it gives
The luminaire draws 9.1 W and delivers 907 lm, slightly more than an old 60 W bulb — light for marking and lighting a path, a park alley or a hotel or restaurant entrance rather than a whole square. The distribution is symmetrical and directed downwards; 1% of the output goes upwards (BUG B1-U1-G0), so the lantern does not brighten the sky above the garden.
3000 K is a warm white. The head can be dimmed with a phase dimmer of either the trailing-edge (TE) or the leading-edge (LE) type.
Resistance and servicing
IP65 lets the lantern stay out in rain and dust without any cover. Norlys gives impact resistance IK10 for the pole structure and IK05 for the light chamber: the body withstands a hard blow, the diffuser only an accidental knock. It operates from −20 to +45 °C.
Module life is L80 above 102,000 h. The LED module and driver are replaced by a professional service using repair kit ZS6106zx0011.