NORLYS EGERSUND 5069GR LED bollard light, graphite, 63 cm

NORLYS EGERSUND 5069GR is a graphite LED bollard with a transparent cylindrical cover and a visible metallised cone reflector. The body is powder-coated cast aluminium in RAL 7016, while the cover is PMMA. This is the 63 cm version, rather than the taller bollard offered within the same family.

A low bollard for paths and terraces

The fitting measures 20 cm in both width and depth. Its plain cylindrical body and absence of decorative detailing suit modern and Scandinavian-style landscaping. NORLYS specifies gardens, private grounds and public spaces, including driveways and terraces. When positioning the bollards, compare their height with surrounding planting and leave the walking route clear. Their low mounting height is a different proposition from an overhead post light.

Warm light with DALI2 control

The included LED module produces warm white light at 3000 K. Complete luminaire output is 1681 lm; the separate figure of 2617 lm describes the light source, not the light leaving the assembled fitting. Total luminaire power is 20.3 W. The rotationally symmetrical distribution matters when planning illumination around the bollard rather than towards a single direction.

The driver supports DALI2 / NightDim. Specify the control arrangement as part of the electrical design instead of assuming compatibility with an existing dimmer. NORLYS directs changes to programmable settings through its sales department, a point worth settling before installing several lights intended to operate together.

Prepare the fixing and allow for servicing

IP65 protection supports outdoor use. The mounting arrangement has three 9 mm holes spaced at 120 degrees on a 65 mm pitch circle. The concrete anchor and other mounting accessories are sold separately, so these need to be considered when preparing the base. Installation must follow the NORLYS instructions and be carried out by a qualified installer.

Both the LED light source and control gear can be replaced by a professional service. This is not a fitting intended for an ordinary user-replaceable bulb.