Endon Miro 9-Light Pendant Lamp Nickel Crystal 50cm SKU 81917

Endon Miro 81917 is a nine-light pendant with a radial, roughly spherical arrangement of arms. Rods extend from the central body to exposed lamp holders and clear crystal-glass details. Its satin nickel finish is visible between the decorative elements, while the bulbs themselves remain on show. Your choice of bulbs therefore contributes to the chandelier's appearance as well as its light.

A 50 cm diameter with a chain suspension

The fitting measures 50 cm across and has an overall suspension height of 57.5–120 cm. Compare both measurements with your ceiling height and the clearance needed below the fitting. Its arms project around the central body, so check the surrounding space rather than only the point directly beneath the ceiling connection.

Height is set during installation by removing chain links. The manufacturer's instructions require the chain, rather than the electrical cable, to support the weight. This allows the drop to be chosen for a particular position over a dining table or within a living area, subject to the clearance that your layout actually needs.

Nine separately purchased E14 bulbs

Endon specifies nine 6 W LED bulbs with E14 caps. Bulbs are not included. Brightness, light colour and bulb shape are therefore choices to make separately. Photographs of the illuminated fitting show a possible installation, not supplied bulbs. The number of holders should not be read as a fixed lumen output for the complete assembly.

Dimming requires suitable bulbs and a compatible switch or dimmer. Check the bulb and control specifications together before buying them. Replaceable bulbs also let you change these lighting characteristics later without replacing the fitting.

Where the radial design works

The exposed arms give Miro a modern character, while the crystal detailing can connect it with a glamour interior. Consider a living room, dining room or bedroom where its diameter and drop suit the intended position. The instructions specifically exclude bathroom and outdoor installation.

This Class I fitting requires an earth connection and a suitable mounting surface. Handle the delicate crystal parts carefully during assembly and maintenance. Endon advises using only a dry cloth, without liquid or abrasive cleaners, and allowing ten minutes to cool before cleaning or changing bulbs.