The Erika S/2D FERSB5 is a ceiling-mounted LED pendant made of two joined rings with diameters of 600 and 800 mm. The rings are satin white aluminium, the light source is integrated into the fitting, and an opal silicone diffuser spreads the light along the full circumference of the rings.
Size and where it fits
The manufacturer's technical drawing gives an overall width of 1575 mm, or about 157.5 cm. That is comparable to a large dining table or a wide sofa, so the pendant suits places with clear space beneath it rather than walkways at head height. The ceiling canopy is 250 mm in diameter and 45 mm high. The manufacturer states a maximum suspension length of 3000 mm, which makes rooms with higher ceilings possible too. Before buying, compare this figure with your ceiling height and with the length and width of the furniture the lamp will hang above.
Light and control
Power is 80 W (35 W + 45 W) with a luminous flux of 3700 lm. The colour temperature is warm white at 3000 K, the colour rendering index is above CRI 80, and the light spreads diffusely all around in a 360° pattern. At this output the pendant can serve as the main light in a dining or living room that is not very large, or as a strong supplement to other lighting. The manufacturer quotes 30,000 hours of operation. The fitting is phase-cut dimmable, but it needs an external dimmer with a push button, which is not supplied and has to be chosen separately. It runs on 220–240 V AC, protection class I, with an IP20 rating, so it is intended for dry interiors.
Look and use
Two slim white rings create a simple, graphic shape without ornament. The design is modern and minimalist: the lamp reads as a light sculptural form beneath the ceiling, and the satin white finish combines easily with pale walls. Given its size and character it suits a position above a dining table, a living room, an office or a hotel space with room for a fitting more than one and a half metres wide. The manufacturer's gross weight is 5.5 kg (net 3.35 kg), so check the ceiling's load capacity and agree the fixing method with an electrician before installation.