GES1014 is a box-shaped Gea Luce outdoor wall light in die-cast aluminium with a white finish. The underside of the body is closed with clear glass and the top plate is solid, so the light leaves the fitting downwards.
Size and space on the wall
The body is 10.8 × 10.8 cm in cross-section and 18 cm tall, and together with its bracket it projects 17.5 cm from the wall. Compare that figure with the walkway width next to a door, or with the swing of a gate or window sash, if the light is to hang right beside one.
A 7.7 × 10.6 cm mounting plate is screwed to the wall; the body slides onto it and is locked with screws from below. The live, neutral and earth wires connect to the terminal block at the plate. The fitting weighs 0.97 kg.
Bulb and power supply
Inside there is one E27 lampholder for a bulb of up to 20 W. That limit rules out traditional 40–60 W incandescent bulbs, while a typical E27 LED bulb fits well within it — and the bulb you choose sets the colour and brightness of the light. To change it, undo the four screws of the glass frame on the underside; the body stays on the wall.
The light runs on 220–240 V. It is protection class I, so the junction box must provide a protective earth (PE) conductor, which connects to the fitting's earth terminal.
Weather resistance and colour options
IP65 means fully dust-tight and protected against water jets, so the light can hang on an exposed facade, by the entrance, on a terrace or on a balcony. The diffuser is glass rather than plastic, so it does not yellow in the sun.
The smooth, square-edged body without ornament suits modern, minimalist architecture. Gea Luce offers the same body in anthracite (GES1013) and rust (GES1015) as well, in case white does not match the facade.