Nowodvorski HERMANOS 10905 is a black pendant fitting with three separate drops beneath a shared circular ceiling canopy. Each shade has a different profile: rounded, conical or flat. Painted steel in P013 RAL 9005 brings the contrasting shapes together without introducing additional colours or decorative arms.
A vertical arrangement over a table
The manufacturer's photograph shows the shades suspended at different levels. This gives the fitting a vertical composition that can define a table area or a separate part of a living room. Its overall width is 40 cm and its maximum height is 130 cm. Before choosing a position, compare those measurements with the tabletop width and the distance from the ceiling to the surface below.
If the fitting will be near a walking route, allow for clearance beneath the lowest shade as well. The stated maximum height is not the length of the cable alone and should not be interpreted as proof of an unrestricted adjustment range.
Choose three LED lamps separately
There are three GU10 sockets for R50 light sources. The fitting takes replaceable LED lamps rated at no more than 10 W per light point. Lamps are not included, so three suitable sources must be purchased separately. Colour temperature, light output and beam angle depend on those choices rather than on the black fitting itself.
Beam angle is particularly relevant above a table. A narrow beam and a broader distribution illuminate the surface differently. Dimming should not be assumed either: compatibility between the selected lamps and any proposed control needs to be checked independently.
Geometry and installation
The slim drops and three geometric shades suit modern and minimalist interiors. In a dining room, a kitchen with a dining area or a meeting zone, the group can identify a particular part of the space. This does not establish that it will provide sufficient light for the whole room; that depends on the chosen sources and the lighting plan.
The manufacturer specifies bridge-bracket mounting and a 220–230 V supply. As a class I fitting, it requires a correctly connected protective earth conductor. Follow the mounting instructions when arranging the electrical connection.
