LED strip KLUŚ WP-K-40-1210-24V 4000 K 24 V 4.8 W/m

KLUŚ WP-K-40-1210-24V is a flexible LED strip enclosed in a silicone sleeve for linear lighting installations. This particular version produces white light at 4000 K and operates at 24 V. The 40 designation distinguishes it from the warmer version in the same family, so the full reference matters when matching several lengths within one installation.

Light output measured per metre

Each metre contains 60 LEDs, consumes 4.8 W and provides a stated luminous flux of 370 lm. These figures describe a length of strip, not the output of a finished luminaire behind a chosen cover. Compare alternatives on the same length basis rather than comparing a per-metre figure with a complete fitting. Its CRI 90+ rating concerns the rendering of illuminated colours, while the 120° beam angle provides a broad spread rather than a narrow spotlight beam.

Check the space and cutting intervals

The manufacturer's drawing specifies a sleeve cross-section of 10 × 4 mm and cutting points every 100 mm. Check those dimensions against the available installation space before choosing a profile or mounting position. Plan the required length around the marked cutting intervals; the strip should not be shortened at an arbitrary point between LEDs.

Preparing a 24 V installation

Choose a power supply for the specified voltage and the combined load of the connected lengths, using the power figure per metre. KLUŚ instructs installers to test the strip beforehand, observe polarity and disconnect power during installation. The mounting surface should be smooth and clean. Avoid sharp edges and bends that could damage components; a wavy mounting surface can also result in uneven light distribution.