LUMINES SFERO W1 is a suspended, 1 m LED kit with a round opal polycarbonate profile and silver anodised aluminium end fittings. It includes the SFERO FLEX light source and suspension accessories, rather than just a bare profile for which every component must be selected separately.
Length and suspension layout
The metre-long section has a 32 mm diameter cross-section. Its length determines the span of the individual light line, so compare it with the space reserved for the fitting before installation. W1 denotes suspension parallel to the mounting surface: when fitted below a ceiling, the profile runs horizontally, not vertically as in the W2 version.
A 1500 mm suspension set is included. This measurement refers to the suspension components, not to the length of the illuminated profile. The manufacturer does not specify this kit for joining into a continuous run, so treat the section as an individual element when planning a longer arrangement.
Warm light and an external power supply
The included SFERO FLEX provides 2700 K light: a warm, slightly yellowish white. Its declared Ra95 colour rendering helps preserve the appearance of material colours under the light. The source is rated at 14 W per metre and requires 24 V DC; it must not be connected directly to a 230 V mains supply. The manufacturer places the power supply outside the profile, so allow for its location and the cable route in the installation plan.
Components supplied with the kit
Alongside the profile and neon strip, the kit contains SFERO FLEX end caps with and without a hole, and silver anodised aluminium SFERO MS2 end-cap sets in both versions. Black braided 2 × 0.75 cable and the suspension set are also included. The opal tube and small silver end fittings give the assembly a simple, minimalist form without an ornate lampshade.