SORGA is a wide Lumines aluminium LED profile for building into plasterboard, here in silver anodised finish and 2.02 m long. Its channel takes up to six 12 mm LED strips side by side, which is why the manufacturer intends it not only for decorative lighting but also as main lighting.
Dimensions and mounting in plasterboard
The body is 87.6 mm wide and 43.7 mm high, and with its side flanges the whole profile measures 117.6 mm. The inside of the channel is 84.8 mm wide and 29.5 mm deep – the figures to check against the strips that need to fit in it.
The manufacturer provides two mounting methods: on mounting springs in an opening cut in the board, or plastered in – the flanges are then embedded in filler and the profile sits flush with the ceiling, with no visible frame. The 2.02 m length is a nominal size including 20 mm of cutting allowance; the manufacturer also offers 1 m and 3 m lengths and custom lengths up to 6 m to order.
What else you need to buy
The profile is sold bare. The cover from the SUPER WIDE range (transparent, milky, frosted milky or black PMMA, opal or black Fractal PC, or milky PLEXI), the end caps – the silver aluminium cap with a cable hole is 12-0655-10 – and the mounting springs 14-5001-00 are bought separately. The power supply is installed outside the profile. Without a cover the profile is rated IP20 and is not sealable.
Lengths can be joined into continuous lines and layouts: the manufacturer offers a straight connector plus 90°, transverse 90°, 120°, 135° and triple 3 × 120° angle connectors. It also states the maximum LED power the profile can dissipate – 67.2 W at a profile temperature of 55 °C and 105 W at 65 °C – which is the figure to compare with the total power of the strips going into it.