Maytoni Basis Radity magnetic LED track light 6 W 4000 K black TR080-1-6W4K-B Promo Code - MAY20 until the end of Oct 31

Maytoni Basis TR080-1-6W4K-B is a black LED luminaire for the Radity magnetic track system. Its short aluminium body has rounded ends and an elongated matte polycarbonate diffuser, forming a compact general-lighting module rather than a spotlight with a narrow beam.

A short module within the track layout

The body measures 116 mm long, 26 mm wide and 28 mm high. Compare these dimensions with the planned spacing of other modules along your track. Basis occupies a short section without the hanging shade or suspension cable of a pendant light. The main photograph shows the body seated directly against the track.

The black finish and continuous elongated light surface suit modern, modernist and minimalist interiors. The visual emphasis stays on the track line and the repetition of small modules instead of a large decorative fitting. This is useful when the lighting layout is intended to remain a restrained architectural element.

Neutral white light and a broad beam

The integrated 6 W LED source delivers 350 lm at a colour temperature of 4000 K. This is neutral white light. When combining it with neighbouring modules, check their Kelvin rating if a consistent light colour is important: a similar housing or the same series name does not establish a matching colour temperature.

A 120° beam spreads light broadly rather than creating a tightly focused accent. Maytoni identifies the series as general lighting for residential and commercial interiors. Include the output of this single 350 lm module in the overall lighting calculation; the number and spacing of fittings depend on the room. Its CRI 90 rating describes colour rendering, not an increase in brightness.

Check the system and control requirements

This variant belongs to the Radity magnetic system and operates at 48 V. Select track by verified system compatibility, not by colour alone. The fitting is not dimmable, so do not plan brightness adjustment as you would for a dimmable version. With an integrated LED source, choosing a separate screw-base bulb is not part of specifying this module.