NORLYS Como 375BL outdoor post light black 110 cm E27 IP54

NORLYS Como 375BL is a black garden post light with a curved arm, a broad metal hood and an elongated clear cover. Its body is powder-coated cast aluminium in RAL 9005, while the cover is UV-stabilised polycarbonate. The visible bulb below the hood and the arch above the head give this fitting the outline of a traditional outdoor lantern rather than a plain geometric bollard.

Allowing room beside a path

The overall height is 110 cm. The hood is 27 cm wide, and the total depth, including the projecting arm, is 42 cm. When choosing a position, check the space occupied by the head as well as the base. Place the post beside the pedestrian route so that neither the arm nor the hood intrudes into the walking space.

NORLYS specifies garden use, private grounds and public outdoor areas. This format can accompany a garden path, the edge of a terrace or an outdoor approach to a hotel or restaurant. The curved arm, distinct hood and black finish suit classic and rustic schemes where a lantern-shaped fitting is preferred.

Choosing the replaceable E27 bulb

Como has one E27 socket. The current datasheet specifies an A55–A60 LED bulb rated at no more than 9 W. That figure is a bulb power limit, not a fixed brightness rating for the fitting. Choose light colour and luminous flux from the specifications of the particular bulb; these properties are not permanently built into this post light.

The clear cover leaves the bulb visible, so its appearance matters even when the light is off. Rotationally symmetrical distribution spreads light around the fitting rather than producing only a narrow spotlight aimed at a single object.

Fixed outdoor installation

The IP54 rating covers protection against dust and splashing water; it does not permit immersion. Como operates on 220–240 V and is a Class II luminaire. It requires fixed mounting and electrical connection by a suitably qualified installer, rather than simply being placed outdoors as a portable lamp.

Mounting uses two holes measuring 5.5 mm in diameter, spaced 90 mm apart. The ART.307 concrete anchor is sold separately. Check the manufacturer's installation instructions and fastening arrangement before preparing the mounting surface.