NORLYS Lillehammer DC1581CG is an outdoor LED wall light finished in cement grey RAL 7033. Its rectangular body combines powder-coated cast aluminium with optical safety glass. This is the 24 V DC version, not a fitting for direct connection to a 230 V mains supply.
Two beams for an architectural wall
Two LED modules with a combined power of 7.2 W produce warm white light at 3000 K. The fitting directs light both upwards and downwards, with a 60° beam in each direction. This distribution is intended to accent a wall surface rather than provide the broad, diffuse spread of a ceiling light.
The luminaire delivers 231 lm. That figure should not be confused with the 1064 lm specified for the light sources themselves. When planning a facade, consider the light leaving the complete fitting and its directional distribution, rather than selecting it on module wattage alone.
Allow for the external power supply
The light requires an external constant-voltage 24 V DC power supply. Its LED modules support dimming, while the control arrangement must be chosen as part of the installation design. There are no conventional screw-in bulbs for the user to replace. Replacement of the LED source is a professional service task, and installation should also be carried out by a suitably qualified person.
Size, positioning and restrained styling
The body measures 18.5 × 11 × 8 cm. Compare these dimensions with the available wall area before deciding on a mounting position, allowing space for both upward and downward beams. Fixing uses two 5 mm holes with 45 × 130 mm spacing.
IP65 protection and an IK08 impact rating are documented for this outdoor fitting. It can accent facades and exterior walls beside a terrace or balcony. Flat faces and a simple geometric outline suit modern, minimalist architecture. Cement grey describes the coating colour: the housing is aluminium, not concrete.
Add your comment about NORLYS Lillehammer DC1581CG outdoor LED wall light 24 V 3000 K cement grey