Nowodvorski ORLA LED M 11550 outdoor wall light, 97 cm, black, 20 W 3000 K IP54 Promo Code 🚀- NOVO15 until the end of Oct 25

ORLA LED M is an outdoor wall light shaped as a vertical tube: a black profile 97 cm tall, fixed to the wall by a single cylindrical bracket about a third of the way along. The lit edge runs the full height, so what appears on the façade is one continuous line of light rather than a point.

97 cm is the whole idea

The height here is the main design decision, not a secondary spec. A metre-long vertical stroke changes the proportions of a wall — it stretches and orders it — which is why ORLA works on tall, plain stretches of façade, beside an entrance door and in corners, where an ordinary sconce simply disappears. At the same time it stands only 7.2 cm off the masonry, so it does not get in the way in a narrow passage.

1300 lumens spread along the whole length

The 1300 lm output comes from 20 W at a 120° beam. Spreading that over nearly a metre of edge gives soft light — the emitting surface is long, so the luminance is low and the fitting does not glare, even while it brightens the whole wall around it. The colour is a warm 3000 K, and colour rendering exceeds CRI 90, which is high for outdoor lighting: brick, wood and render keep their real tone at night instead of turning grey.

IP54, class I, integrated source

IP54 means limited dust protection and resistance to splashing water from any direction — the level intended for façade mounting, including where the fitting is exposed to rain. The luminaire is protection class I, so it needs a connection with an earth conductor. The light source is integrated, supplied with the lamp and not user-replaceable; the manufacturer rates it at 30,000 hours. A mounting kit is included and the method is direct fixing to the wall.

Specification

• Manufacturer and reference: Nowodvorski ORLA LED M, 11550
• Type: outdoor wall light
• Height: 97 cm
• Projection from wall: 7.2 cm
• Light source: integrated LED, included
• Maximum power: 20 W
• Luminous flux: 1300 lm
• Colour temperature: 3000 K
• Colour rendering: CRI >90
• Beam angle: 120°
• Voltage: ~220–230 V, 50/60 Hz
• Ingress protection: IP54
• Protection class: I
• Material: painted aluminium, PC plastic
• Colour: black
• Declared life: 30,000 h
• Mounting: direct, mounting kit included
• Net / gross weight: 0.625 kg / 1.010 kg

The ORLA LED collection

The family covers two sizes and two finishes: the shorter S version and this one, M, each in black and in sand (sand M is reference 11552). Different lengths can therefore be combined on one façade while keeping the same profile and the same light colour — the longer one at the entrance, say, shorter ones along a run of windows.