NORLYS Asker 5214AL is an outdoor bollard with a rectangular upright and a flat, projecting head. Its die-cast aluminium body has a powder-coated light grey finish, RAL 9006. The unornamented outline suits modern and minimalist architecture where a low lighting element is preferable to a decorative lantern.
Planning a low-level lighting line
At 55 cm high, this fitting places the light close to the surface being illuminated. The head extends to a depth of 20 cm and measures 11 cm across. Allow for that projection when positioning it beside a path, terrace or driveway, keeping the body outside walking routes and door swings. It is a garden and architectural bollard, rather than a tall lighting column.
The IP65 rating provides dust-tight protection and resistance to water jets. Its clear PMMA lens is part of the optical system; this is not an opal shade designed to spread light equally in every direction.
Directed output and phase-cut control
The integrated LED produces warm-white light at 3000 K. Output from the complete luminaire is 682 lm with a power consumption of 7.7 W, distinct from the output of the LED source alone. A Ledil SCL lens shapes an IESNA type II/III distribution. Bollard spacing should therefore follow the surface and route to be lit, not an assumption of an all-round pool of light.
This 5214AL version supports trailing-edge phase-cut dimming. A compatible control arrangement is needed if brightness adjustment is planned; the dimmable designation does not mean compatibility with every dimmer or identify this as a DALI version.
Fixed installation and professional servicing
The fitting operates on 220–240 V and requires installation by a qualified electrician. Four 8 mm fixing holes use an 18 × 50 mm pattern. Anchors and other mounting accessories must be selected for the supporting surface and purchased separately. The LED module and control gear are replaceable by a professional service, rather than through an ordinary user-operated bulb change.