Moss 6385GR is an outdoor recessed LED light with a round 13 cm front in graphite RAL 7016. The housing is powder-coated cast aluminium, the front is powder-coated steel, and the light source sits behind clear safety glass. The head carrying the LED module tilts, so the beam can be aimed where it is needed.
Installing it in a ceiling or soffit
The light fits a 110 mm cut-out and needs 85 mm of free space above it — the part hidden in the ceiling is 6.5 cm tall. It is held by spring clips, so it goes into a board: a roof soffit or the ceiling of a canopy. Before buying, check that no beam or rafter runs above the planned hole, because 85 mm is the minimum depth.
A 30 cm H05RN-F 3G1 lead comes out of the light and is joined to the installation in a suitable junction box. The box is not included — Norlys offers junction box 145ZX0009 for this light, sold separately. The light is protection class I, so the installation needs an earth conductor. It weighs 0.5 kg.
What light it gives
The integrated LED module is rated 8 W, the whole light draws 8.3 W and delivers 752 lm, or 90.6 lm/W. The light leaves in a symmetrical 36° beam, so instead of spreading over everything around it, it makes a clear pool — on a path under the eaves, at an entrance or on a section of façade. 4000 K is neutral white without a yellow tint, and CRI 80 with SDCM3 colour tolerance keeps several lights in a row the same shade.
The light can be dimmed with an ordinary phase dimmer — the module works with both trailing-edge (TE) and leading-edge (LE) dimmers. The light source has energy class E. To order, Norlys builds versions with 2700 K and with a narrower 15° or 24° beam.
Durability and service
IP65 means the light is dust-tight and protected against water jets, and its impact resistance is IK06. The manufacturer rates it for −20 to +45 °C. The LED module keeps at least 70 % of its flux for 59,000 h, and if it ever needs replacing, only Norlys's professional service does it.